> For the complete documentation index, see [llms.txt](https://nyron-services.gitbook.io/nyron-permanent-spoof-guide/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://nyron-services.gitbook.io/nyron-permanent-spoof-guide/windows/raid0.md).

# (RAID0)

instructions to do a Raid0 with your Drives.

{% hint style="info" %}
A **Raid0** allows you to combine 2 Drives to 1 in order to generate a **NEW Disk Serialnumber.**
{% endhint %}

{% hint style="warning" %}
We really recommend doing a Raid0 for every game, but it's 100% required for Valorant!
{% endhint %}

{% hint style="danger" %}
**Requirements:** 2x SSD (fast) **OR** 2x M.2 SSD's (fast) **OR** 1x SSD & 1x HDD (slow)

**Attention:** Please remove any other Drive from your PC! 

(You should only have 2x Drives and your installed USB Stick connected to your PC)
{% endhint %}

1. Restart your PC and go into your **BIOS:**
2. Set SATA Mode to "RAID", and if you are using 2x NVME SSD's to raid, then you need to enable NVMe RAID mode, also disable CSM.
3. Save Bios Settings and restart PC
4. Go to your Bios again
5. Go to Advanced -> RaidXpert2 Configuration (for amd users) or Intel Rapid Storage Technology (for intel users) -> Array Managment -> Delete any existing Array
6. Then go to Create Array -> RAID Level = Raid0 -> Select Disks -> Select your 2x Disks
7. Finally scroll down and click "Create Array"
8. Save Bios Settings.