4️⃣Hardware Setup

Follow the Setup for the Hardware you got.

Kmbox Net Setup

• Connect your Kmbox-Net like the image shows

• Install Kmbox-Net Driver (click here) - Run WCHUSBNIC.exe and click INSTALL

• Go to your Network Settings (there should be a new Network Adapter)

• Right Click -> Click Properties -> Select IPv4 -> Properties -> Set IP to 192.168.2.100 and mask to 255.255.255.0 -> Click OK

• Download Kmbox-Net Manufacturer Tool (click here) -> Unzip it

• Run KmboxNetTool.exe as admin (dont worry it will show allot of ?, thats normal)

• Enter IP = 192.168.2.188

• PORT and UUID like it shows on the display of your Kmbox-Net

• Then click the Big Button to connect your Kmbox-Net (green arrow)

• Enter your VID and PID of your Mouse here.

Here is how to find your Mouse VID/PID (in Control Panel under Devices and Printer):

• Then Click on the [VID/PID??] Button after to apply changes.

• Done, now connect your Mouse to the Kmbox-Net and it should be ready. (Make sure to delete the Kmbox Files you downloaded - you dont need them anymore)

• There is one final step to do:

• Go into your Nyron Folder -> Create a text file, name it "kmboxnet" -> in there write the IP/PORT/UUID of your Kmbox-Net in the following format:

-> first line: 192.168.2.188

-> second line: PORT

-> third line: UUID

example:

• Change your kmbox net mac address with TMAC

• Use this tool to cleanup devices

• Hardware Setup done!

Arduino Leonardo Setup

• Connect your Arduino with your PC (make sure you connect your Arduino with a working Data cable to your PC. It should then appear under COM in your Device Manager)

• Download Nyron Arduino Spoofer (click here)

• start run.exe as admin -> Enter "1" to create a restore point

• Enter "2" to spoof Arduino

-> Change Mouse Instructions: n

When it comes to selecting your Mouse, you need to know which PID/VID matches to your Mouse - Here is how to find your Mouse VID/PID (in Control Panel under Devices and Printer):

-> Select the Device with the PID/VID of your Mouse in the Arduino Spoofer

-> Enter Mouse Name of your Mouse you just took the VID/PID from

-> Want to spoof Mouse Version? n

-> Enter your Arduino's COM port from Device Manager:

• Finally press Enter to spoof & flash your Arduino

• Your Spoof is success when Windows opens up a popup saying something like "Your Device gets set up"

• If your Spoof/Flash is Success, there is one final step to do.

• Go into your Nyron Folder -> Create a text file, name it "arduino" -> in there write the VID/PID of your Mouse again in the following format:

-> First Line: 0xYOUR_VID

-> Second Line: 0xYOUR_PID

Example:

• Use this tool to cleanup devices

• Hardware Setup done!