💻
Nyron Permanent Spoof - Guide
  • 👋WELCOME
    • 📃Important Information
  • 💻WINDOWS
    • 1️⃣USB Stick Setup
    • 2️⃣(RAID0)
    • 3️⃣Windows Reset
    • 4️⃣Bios Flash
  • 🎮SPOOFING
    • 1️⃣Bios Configuration
    • 2️⃣Spoofing Process
    • 3️⃣Final Notes
  • Extras
    • 🛠️Troubleshooting
Powered by GitBook
On this page
  1. WINDOWS

(RAID0)

instructions to do a Raid0 with your Drives.

A Raid0 allows you to combine 2 Drives to 1 in order to generate a NEW Disk Serialnumber.

We really recommend doing a Raid0 for every game, but it's 100% required for Valorant!

Requirements: 2x SSD (fast) OR 2x M.2 SSD's (fast) OR 1x SSD & 1x HDD (slow)

Attention: Please remove any other Drive from your PC!

(You should only have 2x Drives and your installed USB Stick connected to your PC)

  1. Restart your PC and go into your BIOS:

  2. Set SATA Mode to "RAID", and if you are using 2x NVME SSD's to raid, then you need to enable NVMe RAID mode, also disable CSM.

  3. Save Bios Settings and restart PC

  4. Go to your Bios again

  5. Go to Advanced -> RaidXpert2 Configuration (for amd users) or Intel Rapid Storage Technology (for intel users) -> Array Managment -> Delete any existing Array

  6. Then go to Create Array -> RAID Level = Raid0 -> Select Disks -> Select your 2x Disks

  7. Finally scroll down and click "Create Array"

  8. Save Bios Settings.

PreviousUSB Stick SetupNextWindows Reset

Last updated 10 months ago

💻
2️⃣